High beryllium copper is a supersaturated solid solution copper alloy, is non-ferrous alloy with good mechanical properties, physical properties, chemical properties and good corrosion resistance together. After solution and aging treatment, it have very high strength limit, elastic limit, yield strength and fatigue limit as special steel have, and at the same time have a high electrical conductivity, thermal conductivity, high hardness and wear resistance, high creep rand corrosion esistance.

---Size of plunger (punch / hammer): 40mm ---Chemical Composition: Be: 1.8-2.0%, Pb: 0.2-0.6%, Co+Ni>=0.2%, Co+Ni+Fe<=0.6%, Other impurities<=0.1%, Cu: Base
---Temper: A(TB00), H(TD04), AT(TF00), HT(TH04)
---Parameters:
Thermal conductivity ≥ 105W/m. K20 degrees Celsius
Tensile strength (Mpa): 1105
Specific gravity (g/cm3): 8.3
Yield strength (0.2%) Mpa: 1035
Softening Temperature (degrees Celsius ): 930
Elongation (%): 1
Elastic Modulus (Gpa): 128
Before quenching hardness 200-250HV
After quenching hardness ≥ 36-42HRC
Thermal conductivity (W/m. K20 degrees Celsius ): 105
Conductivity (IACS%): 18

International Specification:
Rods/Bars/Tubes: ASTM B196, 251, 463; SAE J461, 463; AMS 4533, 4534, 4535; AMS 4650, 4651;
RWMA Class 4
Strips: ASTM B194, AMS 4530, 4532; SAE J461, 463
Sheets: ASTM B194
Wires: ASTM B197, AMS 4725, SAE J461, 463
Plates: ASTM B194, SAE J461, 463; AMS 4530, 4533, 4534, AMS 4650, 4651; RWMA Class 4.
European Standards: CuBe2, DIN 2.1247, CW101C to EN

Note:
ASTM: American Society for Testing and Materials
SAE: Society of Automotive Engineers
AMS: Aerospace Materials Specification (Published by SAE)
RWMA: Resistance Welder Manufacturers' Association
Note: Unless otherwise specified, material will be produced to ASTM.

The advantage:
(1) Good wear resistance and long service life. For Φ100mm or below, generally the availability of die times is around 6000, Φ100mm above generally are available from 2000 to 3000 die times;
(2) Not sticking with steel pressure chamber, Not damaging the pressure chamber. When beryllium copper contact with air, it will form an oxide film on the surface, resulting in self-lubricating. Cast iron punch or steel punch do not form such, so it is easily to damage the pressure chamber, resulting in a great waste, affecting production efficiency;
(3) Full beryllium copper material, with the whole solution, aging treatment, so the hardness is the same inside and outside. When worn to a certain extent, the punch can have a secondary processing, to a punch which can be used for small a pressure chamber, so that life will be longer;
(4) Cobalt beryllium copper does not react with the magnesium alloy, is the uniquely suited punch for magnesium alloy die casting machine;

The advantages of our products: Our company's beryllium copper punch, have a better hardness, density and wear resistance than peers. Guaranteed the hardness of HRC40 degrees above, Φ100mm below generally have the availability around 10, 000 die times, Φ100mm above generally are available from 3000 to 5000 die times, with more than 30% of the higher life time than other manufacturers' similar products.

The advantages of our company:
(1) Price advantage. We are factory directly selling, bypassing a middleman, the profits will be returned to the second class distributors and end customers, to ensure most competitive price.
(2) Quality advantage. Company producing management personnels have many years of experience in producing and researching the beryllium copper. They are trained by the company on the own, have a high degree of understanding and production experience.
(3) Fast delivery. Efficient production management and convenient transportation ensured the fast shipping speed.