Product Description
ASME SB-166 Inconel 601 round bar
UNS N06601 Nickel alloy inconel 601 rod has good high temperature strength,good hot corrosion resistance under oxidzing conditions.
UNS N06601 Nickel alloy inconel 601 rod is usd for industrial fur-naces,heat-treating equipment such as baskets,muffles,and retorts; Solid waste incinerator combustion chamber ;petrochemical and other processequipment ;and gas-turbine components.
Chemical Composition:
Grade
|
% |
Ni |
Cr |
Fe |
C |
Mn |
Si |
Cu |
Al |
p |
s |
601 | Min | 58 | 21 |
Bal. | 1.0 | ||||||
Max | 63 | 25 | 0.1 | 1.5 | 0.5 | 1 | 1.7 | 0.02 | 0.015 |
Inconel 600 is a Nickel-Chromium alloy with good resistance to oxidation and corrosion at high temperatures.
Chemical Composition of Inconel 600
Element | Content |
Nickel (Ni) | 72 % min |
Chromium (Cr) | 14 - 16 % |
Iron (Fe) | 6 - 10 % |
Typical Properties of Inconel 600
Typical properties of
Inconel 600 are covered in the following table.
Property | Metric | Imperial |
Density | 8.47 g/cm3 | 0.306 lb/in3 |
Melting point | 1413 °C | 2575°F |
Co-Efficient of Expansion | 13.3 µm/m.°C | 7.4x10-6 in/in.°F |
Modulus of rigidity | 75.6 kN/mm2 | 10965 ksi |
Modulus of elasticity | 206 kN/mm2 | 29878 ksi |
Properties of Supplied Materials and Heat Treated Materials
Condition of Supply | Heat Treatment (After Forming) | |||
Annealed/Spring Temper | Stress relive at 460°C (860°F) for 1hr and air cool. | |||
Condition | Approx Tensile Strength | Approx Service Temp. | ||
Annealed | 600-750 N/mm2 | 87-109 ksi | -200 to +330°C | -330 to +625°F |
Spring Temper | 900-1250 N/mm2 | 131-181 ksi | -200 to +330°C | -330 to +625°F |
Note - In both cases slight magnetism may occur below -120°C (-184°F)
Relevant Standards
Inconel 600 is covered by the following standards:
• BS 3075 and BS 3076 NA 14
• AMS 5687
• ASTM B166
Equivalent Materials
• W.NR 2.4816
• UNS N06600
• AWS 010
Soft Magnetic Alloys Permalloy are ferromagnetic materials that have little or no retentivity. They are magnetized in a magnetic field and when removed from the field, they lose most, if not all, of the magnetism they exhibited while in the filed. Chinese 1J46/1J50/1J77/1J79/1J85 with High Permeability Alloy is one such Nickel-Iron Soft Magnetic Alloy offered by Haixiang.
Grade & Chemical Composition
Sort | Grade | Chemical Composition (%) | ||||||||||
C≤ | P≤ | S≤ | Mn | Si | Ni | Cr | Co | Mo | Cu | Fe | ||
High magnetic conductivity higher saturation magnetic flux density soft magnetic alloy | 1J46 | 0.03 | 0.020 | 0.02 | 0.60∼1.1 | 0.15∼0.3 | 45.0∼46.5 | ≤0.20 | Bal. | |||
1J50 | 0.30∼0.6 | 0.15∼0.3 | 49.0∼50.5 | ≤0.20 | ||||||||
1J54 | 0.30∼0.6 | 1.10∼1.40 | 49.0∼51.0 | 3.80∼4.2 | ≤0.20 | |||||||
High initial permeability of soft magnetic alloy | 1J76 | 0.30∼0.60 | 0.15∼0.3 | 75.0∼76.5 | 1.80∼2.2 | 4.80∼5.2 | ||||||
1J77 | 0.30∼0.60 | 0.15∼0.3 | 75.0∼78 | 3.9∼4.5 | 4.80∼6 | |||||||
1J79 | 0.60∼1.1 | 0.30∼0.50 | 78.5∼80.0 | 3.80∼4.10 | ≤0.20 | |||||||
1J80 | 0.60∼1.1 | 1.10∼1.5 | 79.0∼81.0 | 2.6∼3.0 | ≤0.20 | |||||||
1J85 | 0.03 | 0.020 | 0.02 | 0.30∼0.60 | 0.15∼0.3 | 79.0∼81.0 | 4.80∼5.20 | ≤0.20 | ||||
1J86 | ≤1.00 | ≤0.30 | 80.5∼81.5 | 5.80∼6.2 | ||||||||
Moment magnetic alloy | 1J34 | 0.30∼0.60 | 0.15∼0.30 | 33.5∼35.0 | 28.5∼30 | 2.80∼3.2 | ≤0.20 | |||||
1J51 | 0.30∼0.60 | 0.15∼0.30 | 49.0∼50.5 | |||||||||
1J52 | 0.30∼0.60 | 0.15∼0.30 | 49.0∼50.5 | 1.80∼2.2 | ||||||||
1J65 | 0.30∼0.60 | |||||||||||
